• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Allowing your cat to move around the house whenever it wants is a great way to keep your pet physically active and mentally stimulated. A flap can aid in reducing accidents due to toilets by making it easier for your cat to exit the house whenever it wants to.

Take a look at the Door

A cat flap lets your pet to move around as they please without having to open the door for them. This makes it perfect to keep them inside when you're home or away and helps to keep unwanted pests from the home too!

It's important to measure the door before you buy a cat flap as there are different sizes available. This ensures you get the correct size to fit inside your door made of upvc, otherwise, it might be too small or large, and your cat may struggle to use it.

Before doing anything however, you should take a ruler and take measurements of the width of the door in various places along its edges. You should also measure the door's height in a few places. This is because the door that is too high will cause your cat to perform the gymnast's routine each time they want to use the flap!

If you're not sure how much to install a cat flap to measure the door, it could be best to seek help from a glazier or someone who does this type of work frequently. They will be able to assist you in determining whether not your door is suitable for a cat flap and provide you with the appropriate size of flap to purchase.

After you've gotten your measurements, the next thing to do is to mark the shape of the hole in the door. This will aid you when you cut the hole and will save you money!

Make sure to put the hole in the correct position. If you are fitting a cat Flap in a upvc door a cat flap to an outdoor door, it's crucial that the hole does not be too close to hinges. This could cause leakage or issues with the seal.

If you have a glass door, it might be best to let this job to a glazier. It can be difficult to install a cat-flap in an existing pane. You might also discover that it breaks and loses its weatherproof seal.

Measure the Cat

A cat flap step flap lets your pet move around as they want, without having to leave him home all by himself. It also stops draughts from entering your home, which is not beneficial for you or your cat.

However, if you own a upvc door panel cat flap or composite door, it may be difficult to install a cat flap. These kinds of doors are often made of different materials than standard wooden or uPVC doors and the procedure for installing them is quite different too. Before you consider fitting the cat flap on your uPVC or composite door, make sure that it is compatible and you have checked with the manufacturer as any modifications could invalidate any warranties.

They are designed to be tough and durable with insulation. They are more resistant to the weather than other types of doors, but it isn't easy to install a cat flap. Consult a professional before installing a cat flap on the uPVC door or composite.

You'll need to determine their height to ensure they pass through the door. This will be easiest when they're sleeping or calm, so that they're not moving around too much. Once you know their height you can measure the distance from their stomach to the floor in order to determine the location of the bottom of the flap. This position can be outlined on the door.

If your composite or uPVC door is made from metal (either aluminium or steel) it is important to be very careful when cutting it using power tools. Drilling into metal can cause cracks, especially if the area is composed of toughened glass. This is why it's recommended to engage an experienced glazier when putting your cat flap inside glass. This will stop the glass from breaking or becoming brittle. A glazier will also provide you with a circular hole for the flap for your cat. This will be less likely to break and is safer for your cat to use.

Cut the Hole

A good cat flap comes with a template drawing that you can use to mark the spot on your door where the hole should go. If it doesn't, you can create your own using a thin piece of paper (tracing papers are great). After the shape is drawn on the door, then use your spirit level to make sure that the design is horizontal. This will ensure that the cat flap sits properly in the opening, and it will not slide open or close.

Then, employ a jigsaw for cutting out the pattern that is marked on the door. Use a blade designed for uPVC door use. It will typically be labeled with this information. If not then ask the staff at the DIY store for assistance. Once the hole is made, place the flap section against it and open it to ensure that the flap moves smoothly. If it becomes stuck at any point, use the filer or the rasp to remove it.

You should also check whether there are no electrical cables or gas pipes inside the door that you will be cutting through since they could be damaged by your jigsaw. Also, be aware of any handles or other fixtures on the door that need to be removed in order to make room for the cat flap in bifold doors flap. You should be careful not to damage them in the process.

Most people who install a cat flap on their own will have an ordinary solid uPVC front door, which means they will not have to face these issues. However, if your door is made of wood or has a decorative panel that cannot be removed then this will increase the difficulty of the task.

It is always worth seeking professional assistance from a cat flap fitter when it comes to these types of jobs as it is crucial to get the job done correctly to avoid potential problems in the future. If you do it wrong, it could cause the door to be damaged and may cause the warranty to be invalidated.

Install the Flap

Once you've got your hole cut, put the flap in place to test whether it will fit and is able to open easily. If you spot any areas that stick or catch to the door, smooth them out using the aid of a hand file or sandpaper until it is a perfect fit and opens with no issues. Make sure the flap is aligned with the door.

If your kit doesn't include an example, you could make use of thin paper such as tracing or Acetate. Lay the paper against the door and draw a line where you will need to place the flap (this will serve as your cutting guide). Then using the pencil lines you've made on the door, mark out four screw holes in each corner of the flap. These will be the screw points you'll use to fit the flap into the correct position.

The majority of uPVC doors are solid and therefore quite straightforward to cut into. If your door is made of composite or GRP however, it could be more difficult. If you're not familiar with this, it might be beneficial to engage a professional to do the job for you. They will also be able to inform you if the door is suitable to install an animal flap.

You can install an opening for a cat flap in composite doors. However, it's essential to consult with the manufacturer or a professional joiner before you do so as any alterations to these doors could void the warranty. If you choose to complete the task yourself, remember that this could be messy and dangerous job.

When you have composite doors, you'll generally need to use the aid of a saw or grinder to cut through the door panel itself rather than simply through the GRP. This is a risky job, and you'll require extra care to not damage the door. It's worth noting that it is much more difficult to cut holes in door glass than a replacement upvc door panel with cat flap door or solid wood doors.